Can't find what you're looking for? Review our sitemap for a list of our pages.
Collections
Products
- ProCore+ Rear Vent tall clip-on flue for double fan models
- ProCore+ SimpleFit Vent Base for Hot dispense models. Suitable for all clip-on rear flues
- ProCore+ SimpleFit Vent Kit for double fan pre - Feb 2024 models with screw-on rear flue
- Product Overview A4 2PP Flyer
- PRV 1/4" PF Plastic set 3 bar (2 Way) White
- Reducer 3/8" Stem x 1/4" PF
- Reducing Bulkhead Connector 1/4" - 6mm
- Reducing Elbow 3/8" Push Fit x 1/4" PF
- Reducing Elbow 5/16" Push Fit x 1/4" PF
- Reducing Elbow 8mm x 6mm
- Reducing Straight Connector 3/8" Push Fit x 1/4" PF
- Reducing Straight Connector 5/16" Push Fit x 1/4" PF
- Reducing Straight Connector 8mm x 6mm PF
- Reducing Tee 3/8" Ends x 1/4" Branch
- Refill Station Cabinet for the C2 Tap System Complete with Large Driptray and Bluetooth Alarmed Waste Kit
- Refill Station Cabinet for the C3 Tap System Complete with Large Driptray and Bluetooth Alarmed Waste Kit
- Refill Station Cabinet for the T1 tap system with Bluetooth Alarmed Waste Kit (without T1 Drip Tray Kit)
- Refill station cabinet for the T2/T3 tap system complete with Alarmed waste kit
- Rigid Elbow 1/4" Push Fit x 1/4" NPTF
- Sani Dosa Assembly 3/8 PF
- Sensorbeam Chilled & Ambient
- Sensorbeam Chilled only
- Sensorbeam Chilled, Ambient & Hot
- Sensorbeam Chilled, Sparkling & Ambient
- Sensorbeam Chilled, Sparkling & Hot
- Sensorbeam Chilled, Sparkling, Ambient & Hot
- Service Spares Kit - E6 - 230v
- Service Spares Kit - T2 - 230v
- Service Spares Kit - T3/Porpoise - 230v
- Shut Off Valve 1/4" Push Fit
- Shut Off Valve 1/4" Push Fit x 1/4" NPTF
- Shut Off Valve 3/8" Push Fit
- Silicon Rubber Elbow Pipe - 255x20x12mm IDmm
- Silicon Tube L-Type
- Silicone Elbow - 30x150mm
- Silicone Pipe - 6mm ID x 1.5mm Wall, cut to 180mm
- Silicone Pipe - 6mm ID x 1.5mm Wall, cut to 240mm
- Silicone Pipe - 6mm ID x 1.5mm Wall, cut to 550mm
- Silicone Pipe - 6mm ID x 1.5mm Wall, cut to 800mm
- Silicone Pipe - 9mm ID x 2mm Wall, cut to 1500mm
- Silicone Pipe Connector
- SimpleFit Ventilation Base cutting template
- Single Check Valve 1/4" Push Fit
- Single Check Valve 1/4" Push Fit inlet
- Single check valve 3/8" Push Fit
- Single Check Valve 5/16" (8mm) PF
- Single Check Valve 6mm Push Fit
- Small Flush Mounted Drip Tray with Drain Outlet
- Small Freestanding Drip Tray without Drain Outlet
- Small U1 Drip tray cutting template
Pages
Blogs
Customer support:
- There is no hot water dispensing from my water dispenser or tap system.
- How to Use an E6 Water Dispenser
- What refrigerant gas does a Borg & Overström dispenser use?
- How many people can a Borg & Overeström dispenser serve?
- Where can I place my water dispenser or tap system?
- What do I need to Install a Tap System?
- What do I need to install a water dispenser?
- How often should I service my water dispenser or tap system?
- What filter do I need for my Borg & Overström Water Dispenser or Tap System?
- Technical Advice 0230: ACS Approval Update
- How to Use a C2 or C3 Tap System
- How to Use a Porpoise Tap System
- How to Use a T1 Tap System
- How to Use a T2 Tap System
- How to Use a T3 Tap System
- How to Use an E4 Water Dispenser
- How to Install a Porpoise Tap System
- A Walkthrough of your Partner Portal
- Why sign up to the Borg & Overström exclusive Partner Portal?
- TA 0226: Changing Stormtec PRV to Norgren PRV
- Technical Advice 0225: T-series and Porpoise Product Updates May 2026
- How to change Sparkling Anti-drip Settings
- How to Change the Hot Water Temperature
- How to turn the Hot Water Recovery Dispense Control On/Off
- How to Commission the Hot Tank
- How to Decommission the Hot Tank
- How to Factory Reset a Water Dispenser or Tap System
- How to turn the Bluetooth Waste Connection On/Off
- How to turn EcoMode On/Off
- Technical Advice 0215: HMI Board Software Update March 2026
- Technical Advice 0221 - T-series Retrofitting Kits Update
- Technical Advice 0220 - T-series Baseplate Assembly Upgrade
- How to Replace the Control Panel on an E6 Water Dispenser
- How to Replace the Control Panel on an E4 Water Dispenser
- Borg & Overström Pallet Configuration
- How to install an E4
- Technical Advice 0213 - Solenoid Change - 115v Products Only
- TI 0314 - T3 Outlet Replacement Kit - 721030 & 721035
- Technical Advice 0211 - E4 Version Update Dec 2025
- Technical Advice 0212 - T3 Outlet Update
- Technical Advice 0208 - Carbonation Level Probe Changes
- Technical Instruction 0303 - E4 Model Range - Compressor Immobilisation
- Best quality water for customers, a distributor guide
- Technical Advice 0210 - Thermal Transfer Paste
- Technical Instruction 0313 - Replacing T1 Main Control Board
- Technical Advice 0209 - T1 HMI Assembly Change
- How to Service and Sanitise a T-Series Tap System
- How to Service and Sanitise an E-Series Water Dispenser
- How to get the Best Sparkling Water from your Borg & Overström Dispenser or Tap System
- Technical Advice 0207 - T1 Main Control PCB Change
Industry insights:
- What is ACS Certification?
- Rabobank’s New Home at Sixty London Wall: Where Sustainable Workplace Design Meets Intelligent Hydration
- How Porsche High Wycombe delivers premium hydration to its customers with the T2 tap system.
- T3 MonoFit tap named a finalist at the Mix Awards 2026
- Premium Hydration Meets Premium Wellness at Arc Community
- Elevating the Daily Commute at The Leadenhall Building with the T1 Tap System
- The Tap Behind Some of the World’s Most Awarded Workplaces
- What is Totality?
- Fynil® | What is it and how does it work?
- Celebrating Three Years of Impact: Borg & Overström and Made Blue Foundation
- Bringing the T2's Premium Hydration to Taylor Wessing’s Paris Office
- Sterizen® | What is it and how does it work?
- T3 comes of age as trending top product in leading commercial environments, driving revenue growth for OCS players
- A Walkthrough of the C2/C3 Tap Systems
- How Koba’s WELL Certified workplace at The Rowe provides state-of-the-art breakout spaces with the T3 tap system
- Distributor Stories: How Soho Kaffe Accelerated Growth with Borg & Overström
- Borg & Overström's Commitment to Manufacturing Quality Water Dispensers
- Why Modus Workspace Ltd chose the T2 tap system for their brand new London office space.
- How great quality water can prevent bad drink reviews
- Sparkling Drinking Water Taps Rise with Borg & Overström.
- Superior Cooling with DryChill®
- Filtration – What is it and how does it work?
- Why filtered water in the workplace wins for dental health.
- Coffee & sparkling water: The ultimate duo
- Water filtration for drinking water dispensers
- Replacing water filters: Improve taste, reduce costs, and protect equipment
- Premium water dispensers for sustainable workplace hydration
- How Office Coffee Companies Can Promote Drinking Water on Their Website
- Distributor stories: How Phoenix Gym improved hydration with Borg & Overström E6 water dispenser
- Drinking Water Safety with T-Safe Filtration and the E6 Chilled only Dispenser
- Why Partnering with a Nearshore, UK, Independent Manufacturer Like Borg & Overström Gives You the Edge
- Distributor stories: Borg & Overström and Aquafontaine partnership
- Distributor stories: Introducing the E6 Chilled only to Barnhill Community High School, with our supplier John Guest
- Understanding PFAS and how they affect our drinking water
- Borg & Overström solidify their status as design leaders at Aquatech
- World Water Day 2025 – Celebrating our ongoing collaboration with Made Blue
- Borg & Overström Fynil® - safeguarding your hydration surfaces
- Small sips, big impact: Micro moments that shape the modern workplace
- Celebrating another year of providing clean drinking water with Made Blue
- Distributor stories: How Love Water provided T3 integrated tap system for Greystar to enhance their new office space.
- Bluetooth® Alarmed Waste Kit: Install a Hot Tap Anywhere
- Safe drinking water in healthcare spaces: NHS Technical Bulletin, No.2024/3
- Integrated drinking water tap solutions: Why to avoid over-the-sink taps
- POU systems for sustainable hotels: significant savings and benefits
- Better drinking water access elevates guests experience
- Making drinking water accessible to everyone: Inclusive, sustainable design
- Today’s travellers are choosing sustainable stays
- Distributor stories: How Vending Sense utilised T3 MonoFit® to upgrade Heidelberg’s office space.
- Independent testing shows significant energy savings with EcoMode
- The Importance of hydration for optimal performance
Manuals:
This page was last updated by Exquisite HTML Sitemap Generator on: Thursday, Jun 25, 2026.